{"title":"Microtec","description":"","products":[{"product_id":"microtec-m226-ecu-for-the-ducati-desmosedici-1","title":"Microtec M226 ECU for the Ducati Desmosedici","description":"\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0944\/0058\/files\/image_catalog_demo_description_logo_large_41655496-a07d-4489-b0b4-7f9e47d03154.png?v=1761557313\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis ECU is a complete replacement solution for the original Ducati Desmo16 RR engine control unit. It implements all the functions and security strategies given by the original one, and is supplied with the original maps and custom maps which are completely configurable. Heart of the ECU is the MPC5534 Power PC from Freescale, and with the 80Mhz system clock guarantee high calculation performances. Complete management of ignition \/ injection parameters, and the automapping feature, available after purchase of a suitable lambda sensor, are the keys for maximum flexibility and performance.\u003c\/p\u003e\n\u003cp\u003eOn-board CAN and RS232 lines, provide a simple and standard way to connect the ECU to a data logger system or a common PC A 3D Windows application, purposely developed for this unit, is designed for customize and monitor all the system parameters and the external sensors data. The red box is fully anodized in aluminum material, and is simple and immediate to install into the original housing.\u003c\/p\u003e\n\u003cp\u003eMajor Features:\u003c\/p\u003e\n\u003cp\u003eIndividual cylinder injection mapping via 20 throttle settings and each 500 RPM Dual maps switchable on the fly Optional auto mapping with 3 A\/F ratios per cylinder Ignition mapping\u003c\/p\u003e\n\u003cp\u003eAdjustable rev limiter (spark and fuel)\u003c\/p\u003e\n\u003cp\u003eAdj. shift lights\u003c\/p\u003e\n\u003cp\u003eAdj. electronic shift (per gear) time outs, delay ect..\u003c\/p\u003e\n\u003cp\u003ePit lane speed limiter Launch control\u003c\/p\u003e\n\u003cp\u003eAdj. pre-injection\u003c\/p\u003e\n\u003cp\u003eTire circumference settings (front and rear)\u003c\/p\u003e\n\u003cp\u003ePre-injection time Water temp correction (spark and fuel)\u003c\/p\u003e\n\u003cp\u003eAir temp correction (spark and fuel)\u003c\/p\u003e\n\u003cp\u003eAltitude correction (spark and fuel)\u003c\/p\u003e\n\u003cp\u003eInjection phase TPS interpolation Diagnostics recording with re-set Password protection\u003c\/p\u003e\n\u003cp\u003eComes with USB cable and full software CD Mechanical data:\u003c\/p\u003e\n\u003cp\u003eDimensions (BOX only) 128 x 95 x 22 BOX material Red anodized aluminum Main Connectors 2 x 64 ways AMP AUX Connector 12 vie AMP 040-174973 Weight 300g Inputs Analogic 10 Digital 10 Lambda sensor 1 Pick-up inductive \/ hall 1 + 1 Battery level 1 Wheel speed 2 Lambda sensor 2 (UEGO via CAN BUS) Outputs Injector Drivers 4 Coil Drivers 4 Fuel Pump 1 Fan 1 RPM 1 Warning Lamp 1 Light 1 Options Electronic shift Data acquisition Auto-mapping lambda sensor Communication CAN Line (1Mbit\/s) 1 RS232 Line 1 Electrical Data Power Supply 8 - 18Vdc Temperature Range -20 \/ +85°C Software Windows application MON226, with 3D maps viewer\u003c\/p\u003e","brand":"Microtec","offers":[{"title":"ECU, Software, and Cables","offer_id":42413258702953,"sku":"E25 + E26","price":1579.95,"currency_code":"USD","in_stock":true},{"title":"Software and Cables ONLY","offer_id":42413258735721,"sku":"E26","price":269.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0944\/0058\/files\/Desmo_M226_D16_001_400250.jpg?v=1761565985"},{"product_id":"microtec-m197-ecu-for-ducati-1","title":"Microtec M197 ECU for Ducati","description":"\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0944\/0058\/files\/image_catalog_demo_description_logo_large_41655496-a07d-4489-b0b4-7f9e47d03154.png?v=1761557313\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003eFully programable replacement ECU for any Ducati with a Magneti Marelli 5.9 Includes USB cable \u0026amp; Software Disc. Injection and ignition control unit, specially designed for use on various Ducati models, replacing the original factory ECU. The heart of the system consists of the Power PC MPC5534 by Freescale that with the high speed of calculation supported by a system clock of 80MHz, ensures great performance. The high level of parameters configuration makes this module easily adaptable to different conditions of use. The unit comes with two basic maps already preloaded and adapted to the model which will be used.\u003c\/p\u003e\n\u003cp\u003eThe following models are fully supported: Hypermotard 1100 - Monster 800 - Monster 1000 - Monster S2R 800 - Monster S2R 1000 - Monster S4 - Monster S4R\/S - Multistrada 620 - Multistrada 1000 - Multistrada 1100 - Sportclassic GT1000 - Sportclassic Paul Smart 1000 - SuperSport 1000 - Sport Touring ST3 - Sport Touring ST4 - Street Fighter 1098 - Super Bike 749 - Superbike 848 - Superbike 998 - Superbike 999 - Superbike 1098 - Superbike 1098R - Superbike1198 - SuperSport 800 - SuperSport 900 - SuperSport 1000\u003c\/p\u003e\n\u003cp\u003eThrough an adapter supplied with the kit, the unit can be connected via USB to a common Windows based PC. A specially developed 3D software, allows you to vary and monitor in real time many configuration parameters and values.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cp\u003e1) Plug \u0026amp; Play\u003c\/p\u003e\n\u003cp\u003e2) Comes with it's own heat sink\u003c\/p\u003e\n\u003cp\u003e3) Works with any Version Windows software\u003c\/p\u003e\n\u003cp\u003e4) Is USB (not serial port)\u003c\/p\u003e\n\u003cp\u003e5) Can auto map 3 different A\/F ratio's per cyl. (with optional Auto tune kit)\u003c\/p\u003e\n\u003cp\u003e6) One ECU fits all Ducati's except late model 2v Siemens systems\u003c\/p\u003e\n\u003cp\u003e7) Updates can be flashed to the ECU\u003c\/p\u003e\n\u003cp\u003e8) Retains DTC on 1098\/1198R, 1198S and SF1098 S\u003c\/p\u003e\n\u003cp\u003e9) Retains 1098R dual injectors\u003c\/p\u003e\n\u003cp\u003e10) Is 100% Italian\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eActivation Instructions 1. After software is loaded and open on screen 2. Maps are already pre-loaded so don’t [Load] anything as CD explains 3. Turn key on 4. Click [Open] on bottom left screen, [Tx] and [Rx] should now highlight 5. On bottom right of screen should display [M197 v1.3a] 6. Click [Rx] then [Configuration] then [OK] Your bike model will display above [Config] 7. Click [RX] then [Mapping 2] then [OK] 8. Click [RX] then [Mapping 1] then [OK] Your map name will now display above [Maps] 9. Set TPS: (Don’t use outdated Microtec instructions) 10. Click [Linear] then top right click [Auto Calibration] then [Set] then hold throttle wide open and click [Set] again 11. Click [Save] then [Configuration] then Save to a folder, then [Tx] then [Configuration] then [OK] 12. Bike should now start.\u003c\/p\u003e","brand":"Microtec","offers":[{"title":"ECU, Cables, and Software","offer_id":42413260144745,"sku":"E10","price":1309.95,"currency_code":"USD","in_stock":true},{"title":"ECU Only","offer_id":42413260177513,"sku":"E11","price":1219.95,"currency_code":"USD","in_stock":true},{"title":"Cables and Software ONLY","offer_id":42413260210281,"sku":"E12","price":244.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0944\/0058\/files\/M197_400.png?v=1761565987"},{"product_id":"microtec-m226-ecu-for-the-mv-agusta-f4-and-brutale-models-up-to-2009-non-abs","title":"Microtec M226 ECU for the MV Agusta F4 and Brutale Models up to 2009 -NON ABS","description":"\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0944\/0058\/files\/image_catalog_demo_description_logo_large_41655496-a07d-4489-b0b4-7f9e47d03154.png?v=1761557313\" style=\"display: block; margin-left: auto; margin-right: auto;\"\u003e\u003c\/p\u003e\n\u003ch3 align=\"center\"\u003e\n\u003cb\u003e IMPORTANT NOTE: THIS WILL NOT WORK ON MODELS WITH ABS\u003c\/b\u003e\u003cbr\u003e\n\u003c\/h3\u003e\u003cp\u003eThis ECU is a complete replacement solution for the original engine control unit. It implements all the functions and security strategies given by the original one, and is supplied with the original maps and custom maps which are completely configurable. Heart of the ECU is the MPC5534 Power PC from Freescale, and with the 80Mhz system clock guarantee high calculation performances. Complete management of ignition \/ injection parameters, and the automapping feature, available after purchase of a suitable lambda sensor, are the keys for maximum flexibility and performance.\u003c\/p\u003e\n\u003cp\u003eOn-board CAN and RS232 lines, provide a simple and standard way to connect the ECU to a data logger system or a common PC A 3D Windows application, purposely developed for this unit, is designed for customize and monitor all the system parameters and the external sensors data. The red box is fully anodized in aluminum material, and is simple and immediate to install into the original housing.\u003c\/p\u003e\n\u003cp\u003eMajor Features:\u003c\/p\u003e\n\u003cp\u003eIndividual cylinder injection mapping via 20 throttle settings and each 500 RPM Dual maps switchable on the fly Optional auto mapping with 3 A\/F ratios per cylinder Ignition mapping\u003c\/p\u003e\n\u003cp\u003eAdjustable rev limiter (spark and fuel)\u003c\/p\u003e\n\u003cp\u003eAdj. shift lights\u003c\/p\u003e\n\u003cp\u003eAdj. electronic shift (per gear) time outs, delay ect..\u003c\/p\u003e\n\u003cp\u003ePit lane speed limiter Launch control\u003c\/p\u003e\n\u003cp\u003eAdj. pre-injection\u003c\/p\u003e\n\u003cp\u003eTire circumference settings (front and rear)\u003c\/p\u003e\n\u003cp\u003ePre-injection time Water temp correction (spark and fuel)\u003c\/p\u003e\n\u003cp\u003eAir temp correction (spark and fuel)\u003c\/p\u003e\n\u003cp\u003eAltitude correction (spark and fuel)\u003c\/p\u003e\n\u003cp\u003eInjection phase TPS interpolation Diagnostics recording with re-set Password protection\u003c\/p\u003e\n\u003cp\u003eComes with USB cable and full software CD Mechanical data:\u003c\/p\u003e\n\u003cp\u003eDimensions (BOX only) 128 x 95 x 22 BOX material Red anodized aluminum Main Connectors 2 x 64 ways AMP AUX Connector 12 vie AMP 040-174973 Weight 300g Inputs Analogic 10 Digital 10 Lambda sensor 1 Pick-up inductive \/ hall 1 + 1 Battery level 1 Wheel speed 2 Lambda sensor 2 (UEGO via CAN BUS) Outputs Injector Drivers 4 Coil Drivers 4 Fuel Pump 1 Fan 1 RPM 1 Warning Lamp 1 Light 1 Options Electronic shift Data acquisition Auto-mapping lambda sensor Communication CAN Line (1Mbit\/s) 1 RS232 Line 1 Electrical Data Power Supply 8 - 18Vdc Temperature Range -20 \/ +85°C Software Windows application MON226, with 3D maps viewer\u003c\/p\u003e","brand":"Microtec","offers":[{"title":"Default Title","offer_id":42644089667689,"sku":"E24 + E26","price":1314.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0944\/0058\/files\/Desmo_M226_D16_001_400250_14ba6fe5-e3e6-429d-87c8-44eeab6ad635.jpg?v=1761565981"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0944\/0058\/collections\/Microtec.jpg?v=1754655743","url":"https:\/\/3wheelhq.com\/collections\/microtec.oembed","provider":"2WheelHQ","version":"1.0","type":"link"}