Overview
The JetPrime is installed using the supplied cable harness using OE style connector plugs downstream of the stock ECU and before the throttle body. In this way the signals which are are sent from the stock ECU can be modified to suit your needs. The JetPrime allows you to the change the fueling relationship regardless to the setup installed by the manufacturer by modifying the timing intervals in which the injectors remain open during the suction phase. As it is normal to find limitations and standardizations on all stock bikes which adjust the engine to get the best compromise, the JetPrime can will improve the performance taking into consideration factors such as the air pressure and temperature of your location to ensure your bike is fueled to an optimum (to give you an example, riding at sea level has a different effect on the bike to when it is ridden at mountain level). A power module like the JetPrime is also crucial should you decide to add an aftermarket race exhaust or air filter to your bike as they require the best possible fueling to guarantee an optimal performance and the JetPrime can help you achieve this. The programming of the JetPrime is done in a very easy and intuitive way by connecting the module via the USB port to a PC. In place of the standard numeric value tables which are found in most aftermarket power modules, the JetPrime uses a simple 2D fueling chart. The JetPrime uses a plug and play system and is connected to the injectors, the IAT sensor and the 12V power connection from the ignition (this is is to avoid power absorption when the engine is turned off). The choice of using the IAT sensor is strategic as it allows to change the ignition timing so that you can avoid any risk of causing damage to the engine should the settings be incorrect. Once you have synchronized a reading of the engine's revs using the software, you will then be able to create your own personal fuel mapping using the arrow cursor keys on your keyboard and then you are all good to go! Note: See Details Tab for fitment.
EXTREME CUSTOMIZATION
The JetPrime is supplied with an easy to use software which can be easily used to set up the module.
EASY TO FIT
Even if you don't know the difference between a slot or a Phillips head screwdriver, fitting a power module has never been this easy (complete instructions are included in the kit)
